Advantages of programmatic complex "Pikas" in a management a public transport are probed. Reports on work of public passenger transport are analysed. The example of drawing the results of analysis of data is considered.

Keywords: public passenger transport, reports on work of transport, reliability of transport services

The paper considers the comparison of power consumption of Two’s Complement System and Residue Number System for digital signal processing applications. The comparison of these two implementations allows to conclude that, for these applications, the RNS uses less power than the TCS counterpart. The aim of the present paper is to highlight the reasons of this power consumption reduction.

Keywords: residue number system, digital signal processing

In article questions of pilot studies of disperse structure of drop ablation are considered when putting electroplated coatings, the technique of performance of experiment is given, the design of experimental installation is considered, results of researches of dependence of height of take-off of drops of ablation over an electrolyte surface from their effective radius are given

Keywords: electroplated coatings, drop ablation, bubbling, drop, height of take-off of a drop, effective radius of a drop

В данной статье приводятся примеры стандартных и не стандартных точек контакта с потенциальными клиентами, описаны механизмы их выявления, а также приведены примеры из практического опыта работы авторов по данной теме. Дано определение понятию «клиентоориентированнсть» с точки зрения клиента, и предложены варианты, где применима данная стратегия. Поднят вопрос о качестве обслуживания и что стоит за этим пониманием для клиента, чего он ждет от сферы услуг и на что рассчитывает. В статье рассмотрены этапы анализа точек контакта, приведены примеры влияния этих точек на формирование лояльного отношения клиента к качеству услуг. 

Keywords: услуга, точки контакт, идентификация, стратегия, анализ, клиент, потребитель, контакт, точки взаимодействия, ориентация на клиента

This paper presents a comparative analysis of the effectiveness of the method Cuthill-McKee algorithm and fill-reducing ordering of a sparse matrix, based on multi-level nested dissection paradigm, developed at the Department of "Computer Science and Engineering," University of Minnesota. For short, we shall call the algorithm Cuthill-McKee CM, and the algorithm of the University of Minnesota — NodeND (Node nested dissection). This article uses a modification of the CM algorithm — RCM (reverse Cuthill-McKee), because in practice the reverse numbering index allows you to get a greater advantage than using a direct algorithm CM. The reason for using these algorithms are high speed computational algorithm, as it is necessary to solve the system proximal to the diagonal, the great acceleration of algorithms for solving FE problems using technology such as CUDA  

Keywords: finite element mesh renumbering methods, three-dimensional mathematical modeling, elasticity theory problems, finite element method, finite element meshes

The problem of stress concentration near step junction of sections in constructional elements and machine elements has been solved in this article by means of one singular integral equation. The formula for determination of stress concentration factor depending on fillet radius has been submitted.

Keywords: Step plate, singular integral equation, conjugation line, stress concentration factor

Considered the organizational and technological systems in monolithic housing construction as the elements of the organization and management of the construction of production. Offered a choice of variability of the production apparatus , determine the most effective scheme of the system organization monolithic construction . It is recommended the formation of a number of consecutive and concurrent source OTSS interconnected unity of purpose , time and place of the action. Developed of activities that provide improved use of construction equipment.

Keywords: organization, technology, building systems, modeling, research, quality, communication, production, operation

In article mathematical formalization of concept of a lag effect of system as a whole, and in particular a lag effect of the social and economic system arising at studying of processes and the phenomena of a labor market is considered.This property allows to consider a problem of a temporary gap between operating impact and result of change of system of a labor market on this influence.

Keywords: Labor market, lap effect, optimizing tasks, economic-mathematical modeling,operating influence, social and economic system

Only innovative activity is able to unite all aspects of science, equipment, economy, business and management. The current state of the innovative sphere of Russia speaks about serious contradictions in its functioning. Considerable scientific and technical capacity of the country was lost in the period of economic reforms. Now often it is impossible to predict precisely succession of events in economic life of the country generally and each organization separately. In modern conditions scientific and technical progress represents innovative development which is defined by the state as the most important priority of economic policy. Innovative potential of any managing subject needs to be estimated as difficult social and institutional system. To encourage managers and the production personnel competently developed motivational strategy is necessary to conduct work on search of innovations. Achievement of the put indicators of innovative development of the Rostov region and the country as a whole has to become result of an offered method of interaction of science, business and authorities.

Keywords: innovative activity, scientific and technical potential, economy, business, ideas, effect, development

The stated task is development of planning system of energy-efficient trajectories for stratospheric airship. Different intellectual approaches for this task were analyzed. Genetic algorithms were chosen. Results of application of genetic algorithms were considered.

Keywords: MAAT, high-altitude airship, control system, planning, genetic algorithm

Cylindering logs are increasingly being applied for construction of houses. Log production are expensive to and is costly application equipment. The article describes the technical and technological solutions allowing to get round the log on the cutting area and at lower cost.

Keywords: cylindering, through technologies, forestry, functional technological analysis

The article discusses issues related to the study of the influence on the deformability of concrete beams of heavy concrete reinforcing steel to replace the carbon fiber arranged in two rows. Found that delamination of the composite beams with reinforcement throughout the range of loads up to 46-54% compared with the reference.

Keywords: concrete, steel, carbon-fiber reinforcement, test samples, strength, steps of loading, deformability, cracking, load level

We consider the relevance, peculiarities and the main stages of composite developments in the technology of production of finishing materials based on glass and ceramics. The description of technology of production of universal fragments, making the block-transformer. As basic materials for the development of applied chamotte ceramics and glass sheet.

Keywords: composite development, design, manufacturing technology, unit transformer, fireclay, glass

The article discusses issues related to the strength of the normal sections of reinforced concrete beams in which the steel reinforcement is completely or partially replaced by a carbon fiber rod arranged in two rows. Found that the strength of these beams is only 13% higher than that of the reference.

Keywords: concrete, steel, composite reinforcing, test samples, strength, failure modes, load level

The article  consider the problem of managing the operational reliability of thermal energy complex enterprises. To improve the efficiency of the organization of repair and reconstruction work will form the organizational and technical building systems. Simulation of complex organizational and technical building systems allows to find effective organizational and technical solutions, as well as to predict their possible development in a variety of situations, the probabilistic nature.

Keywords: operational reliability, organizational and technical building systems, modeling.