The issue of increasing the strength of cutoff and grooving tools is considered in the paper. The principle of strength balance of edge is offered to be used in designing the replaceable inserts. The calculations are made and the shape is designed for the strength balanced front surface of the cutting tools. The analysis of the received data is made and the regularities of the designed shape of the front surface of the cutting edge are established. Designs of replaceable cutting inserts made with a glance to structural characteristics and operating conditions of the cutoff and grooving tools are offered.

Keywords: strength, cutting end, strength balance, cutting end, cutoff tools

The article describes directions optimization of supply chains of the consumer market, inventory management of wholesale and retail executives and organizations that make it up. Presented the study methods of inventory control, disclosed the problems of development of modern theoretical and methodological platform of inventory management in wholesale and retail networks.

Keywords: Inventory management, supply chain, wholesale and retail link, logistics optimization.

One of the main and most relevant and profitable areas of agricultural production - produce quality seeds in the farms, in the process of post-harvest grain processing. Was evaluated basic parameters of the separation process on the existing scheme sieve winnowing machine with certain technological characterization of the purified grain material according to the different conditions of separation, the possibility of defining a predetermined fraction of a feed and seed quality of purified material. Synthesis was performed variational various separation schemes and functioning to identify optimum operating parameters. According to the results of the experiment set technological possibility and the main characteristics of the process producing high-quality purified fraction of the material given by the scheme, which provides the best performance.

Keywords: grain material, fractionation, modeling, cleaning of grain

The problem of temperature stresses in revetments of concrete plates taking in the account various conditions of temperature impact is considered. Contact conditions for various friction coefficient are considered. The simulation is made using finite element method in Ansys © software. The examples of exact simulations for stress fields are given for different parameters of problem

Keywords: temperature stresses, concrete plate, finite element method

The intense strained state analysis results of the ""Kirovets"" KPP-16(20) portal crane trunk solid-state model are given in this work by a finite element method. Model operation of certainly element model in the program environment the Compass 3D v.14 is executed and results of its calculation in the form of the card of tension and the time-temperature chart for two cases of a loading are presented.

Keywords: finite element method, solid-state model, metal construction, portal crane, trunk, card of tension, time-temperature chart.

"This article is devoted to the development of the method for modeling elements of microsystems technology(MST) of membrane type. In this paper perforated membranes are considered and the impact of perforation on the mechanical properties of the membranes is examined. In numerical simulations of the elements it is proposed to use the equivalent mechanical parameters of perforated membranes obtained at the initial stage of the simulation. This will allow to obtain find the optimal parameters of perforation, reduce the time and resource modeling of MST elements. To test the technique numerical experiments were conducted for the two square membranes with sides 1.5 and 3 mm fixed on the contour of the same thickness. We studied the influence of the size of the perforation on the equivalent Young's modulus of the perforated membrane. "

Keywords: microsystems technology, numerical modeling, perforated membrane

The application of asymptotic analysis method for displacement fields in environment is considered on the basis of special representation of motion equation solutions for multilayered half plane in the case of steady vibrations. The large parameter in suggested research method is distance from force source to supposed view point with glance of wave re-reflection from layer boundaries. The results of numerical simulation is given and the conclusion about the effectiveness of suggested method for construction of asymptotic expansion is given.

Keywords: Asymptotic expansion, Fourier integral, multilayered environment

The problem of manufacturing technology heterostructures pezofaza - metal considered in the article. Complexity consists in the fact that during the removal of the polymer in the system at low temperatures are formed porous layers, formed powders separated metal layers, having island macrostructure. One way to solve the problem - reducing the firing temperature heterostructures. Proposed to decrease the sintering temperature by using of functionally active glass-phases. Reducing the sintering temperature of products also allows to replace platinum electrodes inexpensive silver-based alloys. Obtained by solid state reaction method of piezoceramic material has a low sintering temperature (980 ° C) and high electrical parameters. Found that not only the proportion of the vitreous mass, but also their qualitative influence on the properties of piezomaterials    

Keywords: heterostructure glass phase, the sintering temperature, porosity, ferroelectric phase

Piezoelectric ceramics on the basis of the phase of (1-x) PbTiO3-xPbZrO3 is the basis of most high-performance piezoelectric materials. Electrophysical and mechanical properties of these materials can vary widely in different ways. Traditional methods include changes in composition within the morphotropic region and doping. Now is the study of the influence of topical makrolegirovaniya the material properties of the PZT system. As a model system was selected phase of the PZT system, the compositions of which MO belong, one of which contains a dopant in the sublattice (A) and another - in the sublattice dopants (B). The studies established that one of the effective ways of varying the parameters piezomaterials may be the formation of solid solutions on the basis of two or more piezoelectric phases having different combinations of electrical parameters  

Keywords: Piezoelectric ceramics, doping, kombinorovanie, pezofaza, piezo

Due to the depletion of the natural base of non-metallic minerals used for the production of high quality aggregates for concrete, and also because of the significant damage to the environment when working sartirovochnyh crushing plants becomes relevant greater use of fine-grained concrete on local , not always of high-quality materials. Rostov region has large reserves of river small and very fine sand , not suitable for the preparation of concrete mixes. The article suggests ways to improve the quality of fine concrete local fine sands with the introduction of their composition from fine mineral filler (the TMN ), the role of which carry waste production and processing opal - carbonate- kristabolitovyh kremnizemistyh flasks Maslovskoye deposit Rostov region. Chosen route of administration mikronaponitelya and optimal dosage , to analyze the impact of THM on Water-solid, water-cement ratio and the strength of concrete .

Keywords: fine-grained concrete on fine sands, mill ground mineral fillers, mikronapolnyayuschy effect flask, gain strength

In this paper the method works by Chinese artists - Taoists. Identifies the main principles of the above product: contemplation, insight into the phenomenon of identification with the object, inspiration, spontaneity, etc. Represented criteria for evaluating works of art and decryption are the leading graphic symbols.

Keywords: art education, didactics, Taoism, creative method, Taoist beliefs art, theory of art, painting, art

The technique of the geometrical analysis and the analysis of force loading of combined drills with the replaceable multiface plates is offered in this work. This technique is allowing to determine geometrical parameters and specific force loadings in each point of a plate’s cutting edge taking into account its orientation in the drill case. Application of this technique allowed to establish the reasons of the drill’s low durability. The offered technique allows to design drills from the minimum unbalanced radial component of cutting force which increases its working capacity and the processed holes quality. New designs of combined drills both with two, and with three replaceable multiface plates are offered in this work. The durability of this new drills is increased by the plates mutual turn for the minimization of an unbalanced radial component of cutting force  

Keywords: combined drill, replaceable multiface plate, drilling, design, equilibration, geometrical analysis, the analysis of power loading

Disassembling of NPP equipment, systems and metal constructions is a compulsory procedure in the final stage of NPPs work cycle, namely withdrawal. Disassembling technology is closely linked with some necessary conditions, that is why some mandatory requirements must be fulfilled.
The disassembling tasks can be carried out with the help of modern tech-nologies, means and instrumentware. The system of task-oriented engineering and adaptation to the environment and its conditions provides informational and me-thodical supporting in the process of developing the technology of equipment dis-assembling.   
This article presents the common methods and practical recommendations for developing the technological process of disassembling of NPP equipment.  

Keywords: NPP (nuclear power plant) unit, equipment disassembling, fragmentation, safety, permissible doses, remote control, engineering system, model, boundary condition, matrix

The representation of solutions for problem of steady state vibrations of multilayered poroelastic half plane is considered using the superposition of corresponding solutions for homogeneous poroelastic environments. This allows to analyze the influence of individual structural layers on the forming of displacement and stress fields and also give the analysis of energy streams with the refraction boundaries and wave types separation

Keywords: multilayered half space, steady state vibrations, Biot environment, superposition principle

The necessity to improve the grinding process of building materials used in the construc-tion of roads using mobile mo-bile plants, based on the con-centration of operations on a single machine, a diagram of a fundamentally new developed systems for their implementa-tion

Keywords: Mobile installations, roads, cement-concrete mixtures, crushing and grinding equip-ment, mill dynamic autogenous grinding, two-mill dynamic autogenous, factionalism, energy