×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • The extent of the stress-strain diagram of eccentrically compressed concrete pillars

    On the basis of experimental data on the resistance of reinforced concrete columns eccentric compression was obtained analytical dependence of the limiting compressibility of concrete from the varied factors: the relative eccentricity of the external force eo / h and the reinforcement ratio μ.

    Keywords: reinforced concrete column, longitudinal reinforcement, a protective layer of concrete, finite element method, critical load

  • The choice of boundary conditions for the simulation of the temperature field of soil

    The existing methods of calculation of the annual change in soil temperature. Identified areas of their application and the possible deviations from reality. The requirements to the boundary conditions of the calculation. Defines the principles of the choice of initial conditions. The preconditions for the development of a universal method of calculation.

    Keywords: heat pump, renewable energy, solar radiation, transient mode, soil

  • Service as a markering and logistics category

    In the article was shown the essence of the concept of "service" from the standpoint of marketing and logistic activities, the service dualism, the assessment of service of marketing and logistic positions. In the article was made an attempt to differentiate service operations to marketing or logistics activities in the aim of improving the management process of customer service and competitiveness of the company

    Keywords: service, service management, logistics service, marketing service, service assessment

  • Estimation of efficiency of marketing research from the position of economic indicators

    In the article was discusses the problem of assessing the effectiveness of marketing research with the help of different methods; was done an attempt to identify the approaches to determining the effectiveness of marketing research based on their goals. Also was developed the formulas for quantitative evaluation of the effectiveness of marketing research.

    Keywords: the efficiency of marketing research, assessment of marketing researches, economic efficiency of marketing research

  • Determination of deflections of beams with corrugated web with the shear strain

    This article is devoted to the analytical determination of deflections of beams with corrugated web. The reduced shear modulus which must be considered when determining the components deflection from of the shear strain in the beam with corrugated web is defined. Applying the energy method in the form of the Ritz, the problem of determining deflections with considering of bending strain and shear strain is solved. This article, as an example, is considered simply supported beam on both sides of constant and variable cross-section and are given to the final formulas according with three kinds of loading. The results of the calculation of the numerical examples for the three main shapes of corrugated web are submitted. Numerical results with great accuracy are consistent with calculations based on the finite element method.

    Keywords: beams, corrugated web, energy, work, deflection, shear strain

  • The analysis of means of protection of a metalwork from corrosion

    The article provides an example evaluation of the technical condition of building and handling machines in terms of corrosion resistance. Using functional method of determining the weights estimated sufficiency compositions anticorrosion treatment building and handling machines.

    Keywords: The sufficiency condition, the generalized criterion, a metric multiplicative convolution operator on the set of individual criteria

  • Consensus Protocol in Asynchronous Networks with Failures

    Consensus problem involves a system of processes, some of which may be faulty. A fundamental problem of fault-tolerant distributed computing is for the reliable processes to reach a agreement on a same decision. One approach to achieving such agreement is for processes to vote and agree on the majority value. In the absence of faults, this works fine, but the vote even one faulty process can swing the outcome. In this paper we present some result of analysis of a mixed-failure model, where t processes may fail, b out of which is the Byzantine failures and remaining c is crash processes. In a asynchronous model of computation for several distributed problems it turns out that a collection of N processes can tolerate c crash failures if 2c < N, while robustness against b Byzantine failures requires 3b < N. Our algorithm rely on a weak definition of the Byzantine failures which disallows them act as a dead or a crash processes and can tolerate the 2(N – 2c)/3 failures.

    Keywords: fault tolerance, distributed algorithms, asynchronous networks, byzantine failures

  • Microwave band-pass filter on waveguides of complex cross-section, integrated into a multilayered chip with SIW technology

    The possibilities of waveguide elements realization in the structure of multilayered integrated chips of centimeter and millimeter ranges with SIW (Substrate Integrated Waveguide)-technology application are considered. The approaches allowing effectively using in new structures the algorithms and techniques of the electrodynamic analysis and synthesis of passive devices on classical all-metal waveguides are offered. Advantages of use in SIW structure the waveguides of complex cross-section are considered on the example of the microwave band-pass filter.

    Keywords: A.A. Gadzieva, V.V. Zemlyakov, S.V. Krutiev

  • Algorithm of a «problem about transfer»

    The algorithm of a problem about transfer in a higher educational institution by results of Uniform Graduation Examination in view of various groups of introductory tests, priorities of receipt on a speciality,  the minimal lowest passing scores in subjects of groups of introductory tests and estimated figures of reception in high school is considered. The algorithm is realized on the basis of database Mirosoft Excel and programming language Visual Basic for Applications.

    Keywords: group of introductory tests, the candidate of transfer on a speciality, the applicant of transfer for a speciality

  • Improvement of methods for extending the life cycle of the technical condition of long-exploited water conveyance facilities

    In this article the basic parameters required for residual life assessment and life extension of the technical condition of water or long operated facilities. Inlet water or prolonged use many facilities design elements out of order it - complete destruction of concrete structures water conveyance structures, the formation of defects, normal operational performance of the design water conveyance facilities, such as violation of butt joints, as well as the destruction of the individual elements of the structure, etc. During the development of methods for extending the life cycle of water conveyance structures are obtained by the use of impervious geotextile cover that make for a correct evaluation of residual life of structures may extend its operational life cycle. The question arises of the need for correct and timely manner and to assess the remaining amount of the carrying capacity of water conveyance structures, to evaluate the technical condition and extend its life cycle. To do this, we can apply the proposed impervious geotextile cover. 

    Keywords: hydraulic structures, water-conducting structures, life cycle, residual life, technical condition

  • Social and economic efficiency of bringing workplaces to the requirements of labor protection rules

    The article describes the method to assess the social and economic efficiency of bringing workplaces to the requirements of standard of health and safety. The article considers the possibility of calculating the individual groups of social and economic indicators in accordance with the evaluation of various schemes.

    Keywords: social and economic efficiency, assessment methodology workplaces, standard of labor protection, labor conditions

  • Winter concreting technology with flexible heating elements

    The article describes one of the possible ways to improve the durability of roofing bitumen-emulsion mastics used in the repair and new construction due to the introduction of surfactant inhibitors.

    Keywords: SAW inhibitors, roofing, mastics, durability, modifiers

  • The application of the theory of disperse systems for the description of the behavior of the toxic components of the flue and exhaust gases from stationary and mobile sources of urbanized territories

    Considers the most important sources of material pollution of urban territories. A comprehensive approach to studying properties of pollutants, based on the theory of disperse systems. Built block diagram of systematization of parameters that determine the behavior of contaminants from the position of theory of disperse systems. The dependence between the behavior of pollutant aerosol and parameters of its stability.

    Keywords: Contaminant dispersion system, the parameters of pollutant properties, stability of pollutant aerosol

  • Capital structure determinants of construction companies

    This paper presents key capital structure determinants of construction companies and their impact on fund raising and financing mix formation in accordance with the conditions of construction activity. It was found that profitability and tangibility have a positive effect on leverage, risk - the negative and the effect of company size, assets growth rate and taxes is ambiguous.

    Keywords: capital structure determinants, profitability, risk, taxes, tangibility, construction companies

  • A hybrid evolutionary algorithm for solving linear systems of equations describing the circuits

    The article describes the main problems of circuit simulation. The problem of solving ill-conditioned systems of linear algebraic equations (SLAE) of large dimension. The modified algorithm is a linear algebraic solutions. Described a hybrid evolutionary algorithm for solving linear systems based on the proposed modified method. The results of the pilot study and comparison of the algorithm with the algorithms based on the traditional methods for solving linear algebraic equation, which confirm the advantages of the hybrid evolutionary algorithm.

    Keywords: Genetic operators, evolutionary algorithm, the system of linear algebraic equations, computer-aided design.