×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Disassembly mechanical cleaning of plate heat exchangers

    The article considers the problem of sediment formation, sludge and corrosion on the heat transfer surface during the operation of heat exchange equipment at housing and communal services facilities. A new method of non-selective mechanical cleaning using a water hammer is proposed. The description and principle of operation of this cleaning system at the central heating station of the Ogarev Moscow State University are given. To confirm the effectiveness of the proposed technical solution, the results of thermal and hydraulic tests are presented.

    Keywords: deposits, sludge, corrosion, cleaning, heat exchanger, water hammer, heat transfer

  • Modeling of the design of a synthesis gas burner

    The paper describes the process of modeling 3D structures of synthetic gas burners, with the analysis of the simulation results obtained for several types of models and the selection of optimal modes for them. The main use of the burner is planned for boiler equipment for household needs in private as well as apartment buildings, in the absence of central heating. In addition, the article provides a justification for the thermal parameters at the inlet and outlet of the burner.

    Keywords: synthesis gas, combustion, design parameters, combustion chamber, nozzle, modeling

  • Investigation of thermal conditions at an experimental fuel oil heating plant with a pulsed coolant flow

    The article is devoted to modeling heating of fuel oil using a pulsed fluid flow in the SolidWorks Flow Simulation software module. In the future, the use of this technological solution can be considered by a number of industries in the Russian Federation and abroad. The purpose of this article is to describe the results of a computer model of the technological process under study. The computer calculation of the fuel oil heating model using a pulse flow makes it possible to evaluate the efficiency of the process and determine the optimal parameters to achieve maximum efficiency. This will help to reduce the cost of heating fuel oil and increase the efficiency of industrial equipment of enterprises.

    Keywords: fuel oil, oil, coolant, shock unit, diaphragm pump, pulse flow, turbulent mode, cavitation, solidworks flow simulation

  • Applications of modern polymer pipelines for hot water supply networks

    The article presents a feasibility study of the use of the izoproflex-115A pipeline based on thermal and hydraulic calculations of existing thermal networks in Saransk. When modeling two variants (pipe networks made of steel in polyurethane foam insulation and polymer pipelines "izoproflex-115") of pipelines, the same technique was used. Analysis of the calculation results of the longest section of the heat network showed that ISOPROFLEX pipes, on average, have a three-fold capacity reserve in relation to a steel pipe. The use of modern izoproflex-115A pipeline systems will ensure high-quality and uninterrupted heat supply to consumers, increase energy security and energy efficiency, reduce the accident rate of heat supply systems and improve the financial performance of heat supply organizations.

    Keywords: heating networks, pipeline, reserve, capacity, heat supply, consumer, insulation, electronic model, isoproflex-115A, Zulu Thermo

  • Increasing the intensification of heat transfer in shell-and-tube heat exchangers

    The paper studies the problems of heat transfer intensification in shell-and-tube heat exchangers used in the heat supply of buildings. The solution to this problem is to use the circulation of the coolant flow in a pulsed mode, with different frequency pulsations. Based on experimental studies to determine the efficiency of a shell-and-tube water-to-water heat exchanger, a method has been proposed, in accordance with which it has been proved that the pulsed mode, compared to the stationary one, is the most effective in terms of key indicators, such as the heat transfer coefficient and thermal power.

    Keywords: intensification, heat transfer, heat exchanger, coolant, fluctuations, efficiency, thermal power

  • Investigation of thermal conditions in the building of the Accreditation Center

    The article studies the thermal conditions in the heating system of a two-storey building of the laboratory building of the Medical Institute. The analysis was carried out on the basis of data obtained from thermograms of heating devices. The study of thermal conditions in a two-pipe heating system is carried out, the actual and estimated power of each heating device is determined, as well as the temperature inside the premises.

    Keywords: Coolant regulation, heating system, thermostat, thermal modes, thermogram, coolant, balancing, heating system

  • Bionic prosthesis control system based on electromyography

    The work is devoted to some questions of prosthetics of human limbs. A prototype of a prosthesis control system based on electromyography is suggested, which is not inferior to existing analogues, but significantly benefits in its cost.

    Keywords: bionic prosthesis, electromyography, EMG sensor, amplifier

  • Methodology for estimating energy costs for heating infiltrating outdoor air

    The article is devoted to the study of heat losses when heating infiltrating air entering through existing leaks, cracks in doorways of walls, gates, and window bindings. Various methods for determining heat loss through enclosing structures are considered. As a result of the thermal imaging study, a method for determining the heat losses for heating the infiltrating air through existing leaks is proposed.

    Keywords: air consumption, infiltration, heat losses, leaks, enclosing structures, air permeability, microclimate