The article deals with the results of research on the influence of the dosage and composition of the complex mineral additive containing chemical water treatment sludge with gaize, burnt rock or fly ash. The result of investigation is the equation for the change in shrinkage deformations over the time for mortars containing a complex mineral additive in comparison with a standard mixture without additives. There is evaluating of the influence of changes in the mortar moisture on the amount of shrinkage deformation. On the base of the research, we astablished the dependences of shrinkage deformations on the moisture content of the mortar, according to the composition and dosage of the complex mineral additive. The study revaels the influence of a complex mineral additive on shrinkage deformations. The equation has been obtained that describes the change in shrinkage deformations depending on the relative humidity and it has been shown that the tested mortars with a rational composition and dosage of a complex mineral additive with an average air humidity of the driest month in Rostov-on-Don of 47% will not exceed 0.55 mm/m . Shrinkage deformation with the ratio of the complex additive with fly ash or burnt rock 20-30% are 0.42-0.79 relative to the additive-free standard.

Keywords: dry construction mixture, shrinkage, mineral additive, mortar, chemical water treatment sludge, burnt rock, fly ash

When forming in the process of centrifugation an annular section by the method of ""separate"" concreting with the formation of a section of the product at the first stage from the original, including fine-grained concrete mixture, and with the introduction of a coarse aggregate at the second stage into the formed circular section, followed by the final formation of the section and compaction of the concrete mixture by centrifugation, the speed, calculated for the compaction stage, increases, depending on the section zone, the concrete compressive strength from 20% up to 47%, the initial modulus of elasticity from 6 to 19% relative to single-stage centrifugation. The ratio vint / vext of ultrasonic pulse velocities for surface sounding along the inner (vint) and outer (vext) faces of a centrifuged annular section can be considered as a conditional indicator of the uniformity of the concrete structure over the cross section of a centrifuged product. Key words: centrifugation, separate concreting, structure homogeneity, strength and deformation properties, porosity.

Keywords: centrifugation, separate concreting, uniformity of structure, strength and deformation properties, porosity