The overview of the existing horizontal and vertical nodal joints for 3D modular building blocks and plane elements has shown that tongue and groove is the most commonly used connection today. Other types of module attachments are also discussed. Special attention is paid to a modular integrating system encompassing a design description. It is emphasized that the efficiency of modular construction depends, among others, on nodal joints used therein.

Keywords: modular construction systems, operational reliability, horizontal and vertical attachments, coupling bolts, tongue and groove connection

This article analyzes trends and examples of the use of digital technology in order to increase the efficiency and improve the quality of construction projects. BIM technologies already at the design stage make it possible to provide as much as possible all the signs that affect the construction object at the beginning of construction and its further operation. The number of these signs increases, due to the fact that the complexity of the construction process of construction objects increases, as the scale of construction increases, the volume of construction products and building materials increases. In this connection, the requirements for the general designer, contractor, customer, etc. are increasing. At the same time, the customer expects to find, in addition to the project, a solution to reduce costs and increase the functionality of the construction object with the highest parameters. The need for high-performance special technologies and methods of organizing the management of construction works is becoming more acute. BIM technologies are the physical and functional characteristics of a construction object presented in digital form. Digital technologies are an integrated special resource of competencies in order to obtain information about a construction object. It provides the basis for the possibility to accept special decisions of a construction object from construction to the moment of its demolition. This model provides an opportunity to delegate a virtual digital model from the creators of the project to the subcontractor, general contractor, owner, as well as the manager of the construction object. The technical tasks of using information modeling technologies are the starting point for planning an investment project both from the customer's position, since they define the scope of using a BIM model at all phases of the operation of a construction object according to the criteria for evaluating information, and from the position of the contractor, since it acts as the basis for generating a plan when a BIM project will be implemented. The list of characteristic technical tasks of BIM modeling application at different stages of the construction object life cycle is determined. The BIM project algorithm is proposed.

Keywords: information modeling of the construction of objects, labor productivity, physical wear, defects, reliability, diagnostic tasks

The construction industry plays an important role in the national economy, and the products of construction industry enterprises are essential for economic growth and development of the state. At the same time, the current state of affairs in the construction industry is characterized by the presence of economic uncertainties and other restrictions. One of the main directions of development of the construction sector, as well as other sectors of the national economy of the country, is expanded reproduction in the conditions of import substitution, which determines the search for the most promising territories for the location of new construction industry facilities.

Keywords: construction, construction industry, construction complex, strategic management, import substitution

The functional and spatial aspects of the formation of the architectural environment of medical rehabilitation and rehabilitation centers for injured athletes are investigated. The theoretical basis on the problems of functioning of similar facilities - rehabilitation centers for the disabled is considered, the characteristic components of the environment are identified, as well as the technological stages of the rehabilitation process. The generalization of the best Russian experience and existing architectural and planning solutions of medical institutions with rehabilitation functions is carried out. A comparative analysis of analog facilities was carried out in three conditional groups: a) large medical centers with rehabilitation functions for the disabled; b) multidisciplinary rehabilitation centers; c) specialized rehabilitation centers for athletes. A number of promising approaches and trends are identified that can be applied to the formation of conceptual models and adaptive architectural and environmental solutions for sports medicine and rehabilitation centers.

Keywords: rehabilitation center for athletes, functional-spatial, architectural-planning, environmental solutions, models, approaches

Performance of construction and installation works in the conditions of existing health care facilities requires participants of the construction industry to take into account technical equipment of facilities, their specifics, influence of various factors and external conditions on the organisation of construction production, architectural and design solutions of facilities, preservatThe performance of construction and installation works in the conditions of existing healthcare institutions requires from the participants of construction production to take into account the technical equipment of facilities, their specifics, the impact on the organisation of construction production of various factors and external conditions, architectural and planning solutions of facilities, preservation of the functionality of medical institutions and the possibility of their current operation. This article raises the question of searching for new or existing techniques in organisational and technological design, which help to increase the validity of organisational and technological solutions. The practice of reconstruction of medical institutions in modern construction production does not take into account enough factors influencing the development of architectural and planning solutions. However, it is these factors that are determined at the stage of formation of medical and technological task. Such insufficient attention to the factors can significantly affect the organisation of the construction process. The article considers the experience and peculiarities of the organisation of construction production in the reconstruction of healthcare facilities, reflected in the works of domestic and foreign scientists and researchers.

Keywords: reconstruction, healthcare facilities, organizational and technological solutions, documentation, workspace, time, labor costs, transactional model, productivity

The article discusses proposals for improving the use of discharge-pulse technology in the construction of boron-injection piles and camouflage widenings of bored piles with diameters of more than 300 mm. The application of voltages on the electrode system of a pulse current generator from 10 to 50 kV and an electric capacity of about 300 UF is considered. It has been found that in the case of using a relatively low voltage on the electrodes and an increase in the electrical capacity of the capacitor bank, the duration of the shock wave pressure on the ground increases several times. This contributes to a more intensive penetration of the liquid hardening material into the intergranular space of the near-well soil massif. It is proposed to use solutions using slag-alkali binders as a hardening material in the formation of boron-injection piles. Such solutions have greater fluidity compared to cement solutions and, when hardened, form a stone with greater strength and density. The article presents data from experimental studies confirming the increased strength (R = 130 MPa) and frost resistance of a solution prepared on slag-alkali binders, as well as data on determining their corrosion resistance to various aggressive media contained in groundwater. The possibility of stable breakdown of the interelectrode gap in aqueous solutions of slag-alkali media of various consistencies has been established, optimal energy parameters of the discharge have been determined for maximum effect of fixing the soils of the foundations.

Keywords: foundations, drilling piles, discharge-pulse technology, slag-alkali binders

One of the tasks of the state is to create decent living conditions for the population, including providing people with high-quality and comfortable housing. However, over time, housing wears out, becomes outdated, and becomes unsuitable for use. In order to slow down and prevent rapid deterioration of capital construction projects, capital repair measures are being implemented. They are aimed at restoring and replacing structural elements of residential buildings that have fallen into disrepair. Overhaul of housing is a complex of organizational, technological and economic measures aimed at reducing and eliminating the physical deterioration of buildings. Thus, the creation of decent living conditions for the population and the safety of the housing stock, as well as increasing its energy efficiency, depend on the effectiveness of the organization of the capital repair system and its organizational and technological support.

Keywords: major renovation, apartment building, repair and construction work, energy saving, energy efficiency

In order to negate the loss of strength, that can lead to collapse of constructions, we should take measures to prevent cracking. Every crack emersion in reinforced concrete indicates that the accumulated stress has been released in this area of the structure. The cause of cracks are internal tensile stresses that can occur due to internal processes in the element and from external loads on the structure. It is possible to eliminate cracks that have already appeared with the help of repair compounds that fill the volume of cracks in various ways. Injection, as one of the solutions, will help to maintain the strength and durability of the structure.

Keywords: cracking, concrete, reinforced concrete slab, crack, defect, deformation, strength, soil, repair compound, foundation, foundation slab, injection

The article is devoted to the assessment of signs that can lead to the destruction of building structures that undergo physical wear over time. The destruction of the elements can lead to adverse consequences. A mathematical basis is used to diagnose structural failure. With its help, it is possible to determine the influence of signs contributing to the destruction of the structure on the degree of destruction. This article discusses the main provisions of the general kinetic theory, as well as methods of its application in order to determine the emergency condition of structures. The technical condition of the structures is considered from the standpoint of the determinational theory. The concept is based on the principle of reliability of the structure before the first failure. The object's trouble-free operation model embodies the science of the speeds of processes in the field of structuring and decomposition of complex system structures throughout the life cycle and shows the adaptive response of structures to factors that shorten the service life of the object. This concept makes it possible to more accurately assess the risks of structural failure from the effects of certain adverse factors.

Keywords: construction and technical expertise, defects, reliability, diagnostic tasks, diagnostic methods, efficiency

Methods for calculating technological and functional tolerances in the manufacture and installation of steel structures are described. An experimental installation of the structure was carried out to make it possible to clarify the tolerances, and the foundations of the methodology for assessing the qualitative and quantitative manufacturability of assembly elements were put forward to simplify the processes of manufacturing and assembling the structure.

Keywords: methods for calculating tolerances, installation of a structure, manufacturing of structures, manufacturability, complex indicator of manufacturability

The stages of pre-project and design preparation are fundamental for the further implementation of the investment and construction project. The success of construction and commissioning of facilities depends on the successful completion of these stages. The duration of the stages depends on the competence and consistency of interaction between the participants in the investment and construction project, the rationality of decision-making by the technical customer (developer) and a number of other factors. Identifying factors and finding options for rational planning of the stages of pre-project and design preparation is very relevant. As part of the study, a formula was derived for determining the duration of the stages of pre-design and design preparation of objects for construction, taking into account the influence of negative factors. The results of the study are used in planning the stages of pre-design and design preparation of a facility for construction.

Keywords: factors, stages of pre-project and design preparation of objects for construction, duration of procedures

The article provides an overview of the characteristic defects that occur during winter concreting as a result of violations of the technology of concrete work. The relevance of this topic is justified by the large-scale increase in the volume of construction of monolithic buildings for various purposes: residential, public, as well as various types of structures made of monolithic reinforced concrete. A feature of the review of these defects is in this case their main causes, which are associated with violations of concreting technology due to the need in some cases to accelerate production work. The defects presented in this article were identified based on the analysis of accounting documentation when performing visual surveys in the process of scientific and technical support for the construction of buildings of increased responsibility. The violations described in the article were observed at various monolithic construction sites within modern megacities. The article describes the main causes of these defects. The ways of eliminating these defects based on engineering practice are proposed.

Keywords: inspection of building structures, defects of monolithic structures, scientific and technical support of construction, flaw detection of building structures, concreting in winter

This article is devoted to the analysis of the application of the software and hardware complex of mixed reality and augmented reality ""BRIO MRS"" to explore the possibility of digitalization of the construction control process within the framework of JSC CITY - XXI Century. The article also discusses the specific application of mixed reality, which consists in checking the progress of work on the construction of a real building and its compliance with the designed digital information model using a hardware and software complex for augmented and mixed reality. The complex described in this article was actually used and is being used at the construction site. The paper describes the procedure for using a hardware and software complex to verify the compliance of the progress of construction work and the digital information model. The principle of operation of the complex, as well as the prospects that were discovered during the implementation of the experience of using a mixed and augmented reality system, are the subject of further research. In conclusion, based on the conducted research, it turns out what tasks the complex described in the article allows to solve, what advantages it has over analogues and what advantages its introduction into the activities of a modern development company will bring.

Keywords: mixed reality, augmented reality, digitalization, digital information model, modern standards, hardware and software complex, construction control

The study highlights issues related to the characteristics of industrial facilities, and provides existing methods for evaluating facilities. The use of the concept of a complex indicator combining a number of indicators of an industrial facility in the design is proposed. It is assumed that the availability of systematized information about an industrial facility at the design stage will allow a more rational approach to the issue of forming a project team that is sufficient and effective for the implementation of the project.

Keywords: construction, industrial construction, industrial facility, design, integrated indicator, project team, organizational structure

The focus is on the building construction technologies using 3D modular building blocks, which are capable of changing their geometric dimensions and shape or remaining unchanged during installation. The paper discusses the main advantages of using 3D modular building blocks for building construction and offers specific examples showing the related process flows. It also shows horizontal and vertical nodal joints and provides a comparison of two options based on certain criteria of installation adaptability.

Keywords: buildings, construction technology, installation and transport manufacturability, horizontal and vertical connections, technological processes

This article provides a comprehensive overview of the primary technologies used in the construction of high-rise buildings in China. It delves into the most commonly employed construction techniques and the types of structures that are prevalent in this sector. The study is based on a thorough analysis of existing literature and showcases real-world examples to illustrate the application of these technologies. These techniques encompass various construction methods and material choices, which are critical in the successful erection of skyscrapers. The aim of this paper is to offer reference information for professionals, aiding them in selecting suitable technologies and structural types for high-rise building projects. This work is especially useful for those in the construction industry, as it highlights the significant role that building technologies play in high-rise construction. It serves as a practical guide, providing insights into the most widely used construction technologies in the field. This article is intended to be a valuable resource for specialists looking to employ advanced methods in their construction practices, thereby enhancing the efficiency and sustainability of high-rise buildings.

Keywords: civil engineering, high-rise buildings, construction technology, reinforced concrete structure, prefabricated structure, analysis

In the course of the study, an analysis of the condition of the mosaic floor covering in various operating conditions and at various facilities was carried out. The main advantages and disadvantages of floor coverings using marble, the features of their operation are revealed. The purpose of the study is to simplify and confirm the acceptability of the technology of marble floors, taking into account the factors of influence and the type of room. The main tasks are to conduct a study on the wear of the floor covering over time; to determine the timing of the current repair of the floor covering; to conduct a study of the preservation of the reflectivity (gloss) of floor coverings using marble. The practical significance lies in drawing up a graph of the dependence of floor wear on its type and time based on the analysis of visual inspection and physical measurements.

Keywords: marble floor, polishing, grinding, wear, breccia, mosaic coating, technology, profiler, restoration, seamless, colored concretes

This article analyzes the assessment of the signs leading to the possible destruction of the studied building structure. To determine the degree of influence of signs (or groups) on the level of structural failure in their direct diagnosis, it is possible to use a mathematical basis, in particular, the Bayesian approach. The essence of the implementation is to compare the probability of failure for each structure under study. The result of the work is to identify and describe not only the features of the relationship between each feature affecting the destruction of the structure and the calculated probability of destruction, but also their degree of influence on increasing or decreasing the probability of an accident. According to the estimates of the mathematical definition of the signs affecting the destruction of the building structure, it is possible to more objectively assess the effectiveness of the method used to check the condition of the building structure.

Keywords: construction and technical expertise, defects, reliability, diagnostic tasks, diagnostic methods, efficiency

The requirements for increasing the heat transfer resistance of enclosing structures of buildings and structures are continuously increasing. At the same time, a number of buildings cannot be insulated from the outside due to their protective architectural status. Homeowners also cannot make changes to the facade design in the volume of their apartment. The design of a thermal insulation panel for mounting on the inner surface of an apartment wall is proposed. A method for calculating the heat transfer resistance of an enclosing structure insulated in this way is given.

Keywords: energy saving, wall insulation, internal thermal insulation panels, method of calculation of thermophysical parameters

Over time reinforced concrete construction tend to lose their strength properties. An important factor in maintaining the integrity of reinforced concrete structures is the compliance of the parameters of the erected structure with its design values and operating conditions. Otherwise, the likelihood of defects such as the formation of cracks in the protective layer and corrosion of reinforcement increases. There are methods for restoring reinforced concrete structures that can return the strength characteristics to the design level or even exceed it.

Keywords: restoration of the protective layer, repair, inhibitor, adhesion, corrosion, penetrating waterproofing, chemical anchor, foundation, shotcreting

The problems of competitiveness of construction organizations and ways to solve them investigated. The factors limiting the business activity of construction organizations are highlighted and evaluated based on statistical data. Three main categories and corresponding specific factors of competitiveness of construction organizations analyzed. The method of expert assessments revealed the degree of their influence on the competitiveness of the organization. The ways of increasing the competitiveness of construction organizations, taking into account these factors, proposed.

Keywords: competitiveness, increasing competitiveness, factors of influence, construction organization, statistical methods, the method of expert assessments

The article discusses modern methods of conducting construction control (CS) as part of the implementation of the government program for digitalization of the construction industry. The prerequisites justifying the need for automation of the SC are presented. A review of the software used by Russian construction companies to transfer quality control processes into electronic format was carried out. Based on the completed review, a comparative analysis of the most significant and frequently used software functions is presented. The requirements for them have been formed. They are classified based on their integration into digital models of capital construction projects. This allowed the authors to develop an algorithm for conducting a QC taking into account all the requirements of regulatory documents and the interaction of the main participants in the construction process. It provides for automatic data transfer for the generation of as-built documentation in electronic form, the appointment of persons responsible for correcting defects, their photo and video recording with reference to the 3D model of capital construction projects.

Keywords: digital technologies, automation, regulatory documentation, as-built documentation, quality, construction processes, construction control, information model

The main properties of slag-alkaline binders were studied to determine their optimal composition. The possibility of controlling the properties of binders developed on the basis of phosphorus and blast furnace slag by introducing corrective additives into the aluminosilicate component of slag-alkaline binders, as well as by changing the type of alkaline component, has been experimentally proven. The conducted studies confirm the effectiveness of the use of sulfate-containing alkaline components for the production of slag-alkaline binders. As a result of the conducted experiments, slag-alkaline binders with an activity of 30 to 110 MPa were obtained. The possibility of regulating the properties of the developed slag-alkaline binders has been established. The required binding strength is achieved by adjusting the composition of the aluminosilicate component by introducing additives and the type of alkaline component.

Keywords: alkali-silk binders, slags, optimal composition, basicity, chromium peak, construction materials, reconstruction, work technology

This paper analyzes the shortcomings of the existing organizational and technological documentation, namely the construction organization project and the project of work production. It is concluded that the main task of organizational-technological documentation is to minimize construction risks at the earliest stage, to increase knowledge about the project and to transfer the process of development and decision-making to an earlier stage of construction. As a solution to these problems, it is proposed to consider the use of building information modeling technologies (BIM) in construction, and move to the development of digital construction organization project (4D model of the construction process), which is a digital information model of the capital construction object (3D model), the elements of which are interconnected with the work on construction production. Two projects where the building information modeling technology was applied and a digital construction organization project was developed are considered: construction of an underground tunnel and reconstruction of a power unit of a combined heat and power plant. The advantages of using a digital construction organization project are proved, which makes it possible to forecast the planned duration of works, as well as the duration of works, taking into account the occurrence of risk events, necessary resources and equipment.

Keywords: digital project of construction organization, 4D model, building information modeling, project of construction organization, capital construction object

This article is devoted to identifying and analyzing the main factors that influence the effective overhaul of medical institutions, which have a great impact on the quality of life of the population, but do not meet modern standards and new trends of the Industry 4.0 concept. During the study, a comparative analysis of regulations governing the overhaul of medical institutions was carried out, design and working documentation was studied, and practical examples of the implementation of such projects were analyzed. As a result of the study, the most significant factors influencing the effectiveness of capital repairs of healthcare facilities were identified. Identified factors include: the lack of a modern legislative framework on capital repairs, insufficient quality of project documentation, ineffective planning and execution of capital repair projects, and lack of consideration of innovative approaches and technologies. These factors entail a number of additional risks, leading to increased costs and timing of work, as well as a decrease in the quality of work performed. In conclusion, recommendations are presented for optimizing the process of carrying out major repairs of medical institutions, including a detailed study of regulatory documents in order to update them in accordance with modern needs, and the involvement of a technical customer for the purpose of control from the initial stage to the commissioning of the institution.

Keywords: major repairs, healthcare facilities, medical institutions, modern standards, project documentation